47
Oil Change
The gearbox oil capacity is engraved onto the serial tag located on the top of the hood.
Initial (Bed-in) Oil Change:
• The rst oil change must be carried out within the rst 50 hours of use under moderate operating
conditions. Thereafter, every 500 hours.
• Change the gear oil after the rst 30 hours of severe operating conditions* (i.e. severe ambient
temperature conditions of +40°C or below 0°C, when augering, screw piling or core barrelling in hard
ground). Thereafter, every 300 hours.
OIL CHANGE SCHEDULE
MODERATE
OPERATING CONDITIONS
SEVERE
OPERATING CONDITIONS
*
PDD
(DIRECT DRIVE
ONLY)
FIRST OIL CHANGE
Within 3 months OR initial 50 hours
of use
Within the rst 30 hours of use Within the rst year
2ND OIL CHANGE PLUS
SUBSEQUENT OIL CHANGES
After 500 hours or 12 months of use
After 300 hours of use thereafter
(Drive requires a major stripdown,
inspection and rebuild)
Every 3 years there-
after
GEARBOX OIL: ISO EP 320 Extreme Pressure Mineral Gear Oil AUST/UK - PDD TO PD50
14 Maintenance
*Severe/extreme operating conditions include but not limited to ambient temperature conditions of +40°C (104°F) or below
0°C (32°F), working in hard ground, anchor applications and/or extended and continuous hours of operation. The gearbox oil
capacity is engraved onto the serial tag located on the Planetary drive unit.
NOTE
To Next Page
Loading...
