Digga PDD - Safety - Decal Labels

17
The following section provides a glossary of safety labels found on your Digga Planetary drive unit. These labels
are important! Become familiar with both their meaning and location prior to operating your drive unit. They must
be maintained and ensure that each label is clean, visible, and legible. To clean the decal, use a soft cloth, water,
and soap. Avoid the use of solvents, gasoline, or other harsh chemicals, as these may damage the decal. If a
label has been damaged or removed, it must be replaced.
READ OPERATOR’S MANUAL REMOVE IGNITION KEY
ENTANGLEMENT / CRUSH
HAZARD
DE-000960-1
DE-002064-1
DE-000630-1
Completely read and understand
this operator’s manual before
using your attachment. Keep the
manual with the attachment at
all times.
DANGER
Before performing any
maintenance on the Planetary
drive or attachment, switch engine
o󰀨 and remove the key. Never
leave the key in an unattended
machine.
CAUTION
Keep hands and body parts clear
of auger drive. Keep all bystanders
at a safe distance (6 meters/20
feet) from operating auger drive
and work zone. Refer to this
operator’s manual for more
information.
CAUTION
7 Safety - Decal Labels
!
!
!