EasyManua.ls Logo

Digga PDD - Warranty Statement

Default Icon
69 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67
Warranty Statement
PD & Drive Units - Used for Drilling Application
Motor - Warranty up to 3 years compliance with service Interval information and subject to manufacturers inspection.
Gearbox - Warranty up to 5 years subject to compliance with service Interval information and manufacturers inspection.
PD Drive Units - Used for Anchor Application PD4HF - PD50 tted with ECV (Swoosh)
Motor - Warranty up to 2 years compliance with service Interval information and subject to manufacturers inspection.
Gearbox - Warranty up to 3 years subject to manufacturers inspection.
PD Drive Units - Used for Anchoring Application up to 16,000Nm without ECV (Swoosh)
Motor - Warranty up to 1 years subject to compliance with service Interval information and manufacturers inspection.
Gearbox - Warranty up to 2 years subject to compliance with service Interval information and manufacturers inspection.
PD Drive Units - Used for Anchoring Application over 16,000Nm not tted with ECV (Swoosh)
Motor - No warranty.
Gearbox - No warranty.
All new Digga products are warranted to be free from defects in materials or workmanship for a period of twelve (12)
months from date of original purchase, which may cause failure under normal usage and service when used for the purpose
intended. In the event of failure (excluding cable, ground engaging parts such as sprockets, digging chain, bearings, teeth,
tamping and demolition heads, blade cutting edges, pilot bits, auger teeth, auger heads ). If after examination, Digga
determines failure was due to defective material and/or workmanship, parts only will be repaired or replaced. Digga may
request defective product or products be returned prepaid to them for inspection at their place of business or to a location
specied by Digga. The warranty will be considered void if the product or any part of the product is modied or repaired in
any way not expressly authorised by Digga, or if closed components are disassembled prior to return. Closed components
include, but are not limited to: Gearboxes, Hydraulic pumps, Motors, Cylinders and Actuators. Any goods returned to Digga
by the customer under warranty or repair must have all freight charges prepaid for on the customers account. Any claims
under this warranty must be made within fteen (15) days after the Buyer learns of the facts upon which such claim is based.
All claims not made in writing and received by Digga outside the time period specied above shall be deemed waived.

Other manuals for Digga PDD