Digga PDD - Page 65

65
Reference Problem
observed
Possible
reason
Troubleshooting steps
7 Halo doesn’t
turn on
Damaged
lead in cable
(yellow tail)
The lead in cable with the yellow tail connects the Halo hood box to the cable system
outside of the hood. If this cable is damaged it will require a replacement to be installed
by removing the hood which needs to be performed by a qualied Digga service
technician.
8 Halo doesn’t
turn on
Damaged or
failed Halo
component
If the Halo hood box or LED ring is damaged or has experienced a failure and requires a
replacement, please contact Digga service for assistance.
NOTE
PM-000198 - HALO Operator's Manual is a stand alone manual for the HALO Alignment System. Please contact your
local DIGGA dealer if you require a copy of the manual.
HALO TROUBLE SHOOTING