Configure the AnywhereUSB Plus Hub from the CLI ?
AnywhereUSB® Plus User Guide
116
?
Purpose
Displays options for the current line or command.
Syntax
#> ?
Options
None.
Examples
Display root commands
#> ?
backup display factory-default findme
fwupdate exit help info
newpass quit reboot revert
set show who ?
Display options for the set command
#> set ?
syntax: set [options...]
cloud host network service system time usbclient
usbgroup
Display options for the net command
#> set net ?
syntax: set network [options...]
options:
globalsettings
ip=(ipaddr)
submask=(subnet mask)
gateway=(gateway ipaddr)
dhcp=(on|off)
dns1=(primary dns server ipaddr)
dns2=(secondary dns server ipaddr)
To Next Page
Loading...
