Digi AnywhereUSB 2 Plus

Configure the AnywhereUSB Plus Hub from the CLI who
AnywhereUSB® Plus User Guide
153
who
Purpose
Displays active connections to and from the Hub.
Syntax
who
Examples
Display a list of all current connections
#> who
ID Local address Remote address Service
-- --------------------- --------------------- --------------------
1 10.10.12.14:18574 10.10.12.19:57536 AnywhereUSB
2 10.10.12.14:18574 10.10.12.16:37298 AnywhereUSB
3 10.10.12.14:18574 10.10.12.11:50217 AnywhereUSB
4 10.10.12.14:18574 10.10.12.12:34844 AnywhereUSB
5 10.10.12.14:22 10.10.12.16:37301 Command line
6 10.10.12.14:60348 52.73.177.207:3199 Remote manager
7 10.10.12.14:18574 10.10.12.28:37324 AnywhereUSB