Configure the AnywhereUSB Plus Hub from the CLI fwupdate
AnywhereUSB® Plus User Guide
127
fwupdate
Purpose
Updates the firmware on the Hub. The Hub reboots when the firmware update is complete.
Syntax
fwupdate [
host
]:[
filename
]
A local file for [filename] may be selected by specifying "local" as the [host] value.
The [host] is the literal "local" or a hostname or IP Address of the TFTP host that can serve this file.
Example
Load new firmware from local file update.bin.
#> fwupdate local:update.bin
Load new firmware from locale file AW08_firmware_A.bin
#> fwupdate 1.2.3.4:AW08_firmware_A.bin
To Next Page
Loading...
