AnywhereUSB User Manual (90001085_B) 13
Interpreting the Status LEDs for the AnywhereUSB/5
The AnywhereUSB/5 has six LEDs on the front panel: one System Status
LED and five hub LEDs. Each LED is capable of displaying three colors:
red, green, or orange.
System Status LEDs
On initial power up the System Status LED is orange for two seconds
while the system initializes and then blinks green. If DHCP is enabled and
the unit is booting up, the System Status LED will be orange while the
AnywhereUSB searches for a DHCP server. If it cannot find a DHCP
server, it will return to the default configuration to allow the Configuration
Utility to assign a static IP address.
Hub LEDs
Green hunting pattern across all LEDs Not connected to a host PC.
Orange alternating on ports 1-3-5 and
2-4
Updating image in Flash. Do not remove
power from AnywhereUSB while flash is
being updated. Doing so will damage your
AnywhereUSB.
Solid Green Hub port is powered.
Green over Red hunting pattern Please call customer service.
To Next Page
Loading...
Need help?
General
