AnywhereUSB User Manual (90001085_B) 9
Front Panel Information for the AnywhereUSB/2
System Status LED
: Blinks green during normal operation.
USB LEDs
: Solid green when USB port is controlled by host PC; off
when port is unowned.
Reset Button
: Used to either reboot the device or reset its configuration
to factory defaults.
Interpreting the Status LEDs
Interpreting the Status LEDs for the AnywhereUSB/2
The AnywhereUSB/2 has three LEDs on the front panel: one System
Status LED and two USB LEDs. When powered on, the System Status
LED blinks green. When the USB ports are owned by a remote host PC,
the USB LEDs will be solid green; if the USB port is unowned, the USB
LED will remain off.
To Next Page
Loading...
