Command descriptions set samba
ConnectPort® LTS Command Reference
105
Specifies the host name or the IP address of Samba server
path=path
Specifies the full path of directory on Samba server.
timeout=5-3600
Specifies a time out value for waiting response from Samba server.
interval=5-3600
Specifies an interval to check the status of Samba server.
user=user name
Specifies the name of user for Samba service.
password=password
Specifies the password for the user of Samba service.
alert_state={off|on}
Specifies whether the alert for changing of the status of Samba service will be enabled
on
Enable the alert.
off
Disable the alert.
Default is off.
alert_description=string
Specifies the description for the alert.
alert_priority={normal|high}
The priority of the alert when the alert type is email.
normal
The alert is sent with normal priority.
high
The alert is sent with high priority.
The default is “normal.”
alert_type={email|snmptrap|all}
Used to determine what kind of an alarm is sent: an e-mail alarm, an SNMP trap or both.
For SNMP traps to be sent, the IP address of the system to which traps are sent must be configured,
by issuing a “set snmp” command with the “trapdestip” option. See "set snmp".
email
An email alarm is sent.
snmptrap
An SNMP trap is sent. If snmptrap is specified, the “subject” text is sent with the alarm.
all
Both an email alarm and SNMP trap are sent.
To Next Page
Loading...
Need help?
General