Digi ConnectPort LTS 16 Command Reference

Command descriptions set snmp
ConnectPort® LTS Command Reference
121
[linkuptrap={off|on}]
[logintrap={off|on}]
[ snmpv3 trap options ] are:
[trap security_level={auth nopriv|auth priv|
noauth nopriv}]
[trap_auth_user= username ]
[trap_auth_protocol={md5|sha}]
[trap_auth_pwd= password ]
[trap_priv_protocol={des|aes}]
[trap_priv_pwd= password ]
[trap_engine_id= string ]
Display SNMP settings
set snmp
Options
[snmpv1v2c options]
snmpv1v2_enabled={off|on}
Enables or disables the accessing of SNMP-managed objects through SNMP v1/v2c protocol.
off
Disables the accessing of SNMP-managed objects through SNMP v1/v2c protocol.
on
Enables the accessing of SNMP- managed objects through SNMP v1/v2c protocol.
publiccommunity=string
The password required to “get” SNMP-managed objects(v1/v2c). The default is “public”.
privatecommunity=string
The password required to “set” SNMP-managed objects(v1/v2c). The default is “private”.
snmpv1v2_permission={get_only|get_set}
Allow SNMP clients to set device settings through SNMP (v1/v2c).
get_only
Disabled the capability for users to issue SNMP “set” commands uses use of SNMP
read-only for the ConnectPort LTS product.
get_set
Enabled the capability for users to issue SNMP “set” commands uses use of SNMP read-
only for the ConnectPort LTS product.
[snmpv3 options]
snmpv3_enabled={off|on}
Enables or disables use of SNMP version 3.
off

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English