Digi ConnectPort LTS 16 Command Reference

Command descriptions set snmp
ConnectPort® LTS Command Reference
123
priv_pwd=password
Set the password for privacy.
[snmp trap options]
trap_version={none|v1|v2c|v3}
Specify the version of SNMP protocol to use for SNMP trap configuration.
none
Disable SNMP trap.
v1
Use SNMP v1 protocol for SNMP trap.
v2c
Use SNMP v2c protocol for SNMP trap.
v3
Use SNMP v3 protocol for SNMP trap.
trap_community=string
Set community string to be sent with SNMP trap.
trapdestip=ip address or fqdn
Used to configure the IP address of the system to which the agent should send traps. To enable any of
the traps, a non-zero value for trapdestip must be specified. The ”trapdestip” option is required in
order for alarms to be sent in the form of SNMP traps.
trapsecdest=ip address or fqdn
Secondary trap destination IP address; an optional configuration.
authfailtrap={off|on}
Enables or disables the sending of authentication failure traps.
on
Enables the sending of authentication failure traps.
off
Disables the sending of authentication failure traps.
The default is “off”.
coldstarttrap ={off|on}
Enables or disables the sending of cold start traps.
on
Enables the sending of cold start traps.
off
Disables the sending of cold start traps.
The default is “off”.
linkuptrap={off|on}
Enables or disables the sending of link up traps.

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English