Command descriptions set snmp
ConnectPort® LTS Command Reference
124
on
Enables the sending of link up traps.
off
Disables the sending of link up traps.
The default is “off”.
logintrap={off|on}
Enables or disables the sending of login traps.
on
Enables the sending of login traps.
off
Disables the sending of login traps.
The default is “off”.
[snmpv3 trap options]
trap_security_level={auth_nopriv|auth_priv|noauth_nopriv}
Indicates the security level of the user with regard to authentication and privacy for SNMP v3 trap.
auth_nopriv
Set the security level to use authentication only.
auth_priv
Set the security level to use both authentication and privacy.
noauth_nopriv
Set the security level not to use both authentication and privacy.
trap_auth_user=username
The SNMPv3 trap user name that is authenticated to communicate with the SNMP engine.
trap_auth_protocol={md5|sha}
Specifies the authentication protocol algorithm for SNMP v3 trap.
md5
Set MD5 algorithm as authentication protocol.
sha
Set SHA algorithm as authentication protocol.
trap_auth_pwd=password
SNMPv3 trap authentication password.
trap_priv_protocol={des|aes}
SNMPv3 trap privacy protocol.
des
To Next Page
Loading...
Need help?
General