Digi ConnectPort LTS 16 Command Reference

Command descriptions revert
ConnectPort® LTS Command Reference
46
samba
Reverts the service settings configured by the “set samba” command.
sdmemory
Reverts the SD memory settings configured by the “set sdmemory” command.
serial [port=range]
Reverts the serial settings configured by the “set serial” command.
serialport [port=range]
Reverts all serial settings configured by the “set serial”, “set tcpserial”, “set udpserial”, “set profile”,
“set serial”, “set buffers”, “set pmode”, and “set modem” command.
service
Reverts the service settings configured by the “set service” command.
smtp
Reverts the SMTP settings configured by the “set smtp” command.
snmp
Reverts the SNMP settings configured by the “set snmp” command.
socket_tunnel
Reverts the socket tunnel settings configured by the “set socket_tunnel” command.
switches [port=range]
Reverts the switch settings configured by the “set switches” command.
syslog
Reverts the SYSLOG settings configured by the “set syslog” command.
system
Reverts the system settings configured by the “set system” command.
tcpserial [port=range]
Reverts the TCP serial settings configured by the “set tcpserial” command.
udpserial [port=range]
Reverts the UDP serial settings configured by the “set udpserial” command.
usb
Reverts the USB settings configured by the “set usb” command.
web
Reverts the Web settings configured by the “set web” command.
xbee
Reverts the XBee settings configured by the “set xbee” command.
Examples
Reset a device’s serial setting
The device serial setting is reset to the default serial configuration.
#> revert serial
Reset a serial port to default settings
#> revert serial port=2

Digi ConnectPort LTS 16 Specifications

General

Brand	Digi
Model	ConnectPort LTS 16
Category	Server
Language	English