Command descriptions set lcd
ConnectPort® LTS Command Reference
66
set lcd
Purpose
Configure LCD device settings and displays current LCD settings
Required permissions
Permissions must be set to one of the following:
n For a user to display the LCD settings: “set permissions s-lcd=read”
n For a user to display and set the LCD settings: “set permissions s-lcd=rw”
Syntax
Enable/Disable LCD
set lcd state=[on|off]
Change background image idle time-out
set lcd wait_time=
wait time
Change default background image
set lcd use_defaultimage=[on|off]
Load background image from tftp server
set lcd load_image=host:
filename
Change the status of backlight
set lcd backlight =[on|off]
Options
state={on|off}
Sets whether the LCD is enabled or disabled.
on
Enable the LCD display.
off
Disable the LCD display.
wait_time=wait time
Specifies the idle time out of LCD background image. When there is no input from LCD
key pad during wait time, LCD displays a background image automatically.
use_defaultimage={on|off}
To Next Page
Loading...
Need help?
General