Command descriptions set lcd
ConnectPort® LTS Command Reference
67
Specifies whether the default background image will be used on idle time out.
on
Use the default background image
off
Use the custom background image loaded by user.
load_image=host:filename
Specifies the tftp server and file name to be used to upload user custom LCD background image.
host
The IP address or DNS name of a host from which the custom LCD background image
will be downloaded to the ConnectPort LTS device using TFTP.
filename
The name of a file on the host that contains the custom LCD background image. If your
host’s implementation requires a complete path to this file, specify the path here as
well. (Be aware that ConnectPort LTS supports only 128x64 8bit bitmap file for LCD
background image.)
backlight={on|off}
Specifies the status of LCD backlight.
on
Turn on the LCD backlight.
off
Turn off the LCD backlight.
Examples
Enable LCD display
#>set lcd state=on
Change background image idle time-out
#>set lcd wait_time=30
Load a custom LCD background image from TFTP server
#>set lcd load_image=192.168.100.1:custom_image
See also
n show lcd"
n ConnectPort LTS User Guide chapter on the LCD interface.
To Next Page
Loading...
Need help?
General