Digi ConnectPort LTS8 Command Reference

Command descriptions show
ConnectPort® LTS Command Reference
162
show
Purpose
Displays the current settings in a device, including current configuration settings, boot code loaded in
the device, and the effects of commands issued to the device.
Required permissions
For products with two or more users, for this command to display current device settings, the various
“set” commands must have be set to either “read” or “r-self,” depending on the available permissions
for the commands. See "set permissions" for details on setting user permissions for commands.
Syntax
show option [port= range ] [range= range ]
Options
option
Specifies which settings in the device to show. The following options can be specified. The use of the
“port” and “range” options on the show command depends on whether the command that was used
to configure the settings uses the “port” and “range” options as well.
Option Displays settings configured by
Works
w/port
option
Works
w/range
option
alarm set alarm No Yes
autoconnect set autoconnect Yes No
buffer set buffer Yes No
ethernet set ethernet No No
group set group No No
host set host No No
permissions set permissions No No
pmodem set pmodem Yes No
profile set profile Yes No
python set python No Yes
realport set realport No No

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English