Digi ConnectPort LTS8 - Default Permissions

Command descriptions set group
ConnectPort® LTS Command Reference
63
id=range
Specifies the ID or range of IDs of the groups to be acted on.
name= string
Specifies the name of the group to be acted on.
newname=string
Specifies a new group name.
Default permissions
When a new group is created, it has no permissions.
Examples
Add a new group
#> set group add newname=gurus id=4
Remove group 7
#> set group remove id=7
Set a new group name
#> set group id=4 newname=gurus
See also
n newpass
n revert
n set permissions
n set user
n show
n User permissions in ConnectPort LTS products.