Command descriptions info
ConnectPort® LTS Command Reference
34
Statistic Description
InUnknownProtos Number of received datagrams discarded because the specified protocol is
not available.
OutDiscards Number of outgoing datagrams that were discarded for miscellaneous
reasons. This statistic is not used and is always zero.
InDiscards Number of received datagrams discarded for miscellaneous reasons.
FragCreates Number of outgoing datagram fragments created.
ReassembleOks Number of received datagrams that were successfully reassembled from
fragments.
FragOks Number of outgoing datagrams that were fragmented.
FragFails Number of outgoing datagram fragmentation attempts that failed. This
statistic is not used and is always zero.
Serial statistics
Statistic Description
rbytes Total data in: the number of bytes received.
tbytes Total data out: the number of bytes transmitted.
overrun errors The number of times FIFO has overrun. The next data
character arrived before the hardware could move the
previous character.
frame errors The number of framing errors detected. The received data
did not have a valid stop bit.
parity errors The number of parity errors detected. The received data did
not have the correct parity setting.
breaks The number of break signals detected.
TCP statistics
Statistic Description
InSegments Number of segments received.
OutSegments Number of segments sent.
InErrors Number of segments received with errors.
RetransmitSegments Number of segments retransmitted. Segments are retransmitted when the
ConnectPort LTS product doesn't respond to a packet sent by the client. This
is to handle packets that might get lost or discarded somewhere in the
network.
To Next Page
Loading...
Need help?
General