Command descriptions set modem
ConnectPort® LTS Command Reference
69
The modem will dial-out to establish connections with external hosts or to connect to
an external PPP network.
network_bridge
The modem can be used both to establish connections to other hosts as well as receive
connections from other hosts.
ppp_connection={on|off}
Specifies whether the modem will use the PPP connection.
on
Allow user to use the PPP connection.
off
Do not allow user to use the PPP connection.
init_string=string
An AT command that is sent to the modem after it is reset.
Examples
Set a serial port to an incoming modem profile
#>set modem port=1 state=on connection_type=incoming
Display current modem settings
#>set modem
See also
n set ppp
To Next Page
Loading...
