Digi ConnectPort LTS8 - Page 79

Command descriptions set permissions
ConnectPort® LTS Command Reference
79
[telnet={none|execute}]
[who={none|execute}]
[webui={none|execute}
[s-alarm={none|read|rw}]
[s-autoconnect={none|r-self|read|rw-self|
w-self-r|rw}]
[s-ethernet={none|read|rw}]
[s-group={none|read|rw}]
[s-host={none|read|rw}]
[s-internalmodem={none|read|rw}]
[s-lcd={none|read|rw}]
[s-modem={none|read|rw}]
[s-network={none|read|rw}]
[s-permissions={none|read|rw}]
[s-pmodem={none|r-self|read|rw-self|
w-self-r|rw}]
[s-portauth={none|read|rw}]
[s-ppp={none|read|rw}]
[s-profile={none|r-self|read|rw-self|
w-self-r|rw}]
[s-python={none|read|rw}]
[s-rtstoggle={none|r-self|read|rw-self|
w-self-r|rw}]
[s-sdmemory={none|read|rw}]
[s-serial={none|r-self|read|rw-self|
w-self-r|rw}]
[s-service={none|read|rw}]
[s-snmp={none|read|rw}]
[s-socket_tunnel={none|read|rw}]
[s-sysauth={none|read|rw}]
[s-system={none|read|rw}]
[s-tcpserial={none|r-self|read|rw-self|
w-self-r|rw}]
[s-trace={none|read|rw}]
[s-udpserial={none|r-self|read|rw-self|
w-self-r|rw}]
[s-usb={none|read|rw}]
[s-user={none|read|rw}]
[s-webui={none|read|rw}]
[s-xbee={none|read|rw}]
Display current network configuration options
set permissions
Options
Permission descriptions
Here are the user permissions and their effects on commands.
none
The command cannot be executed.
execute
The command can be executed.