The Spec
Is Not Acceptable As It Will Cause Scale To
Lock
In All
When This Condition
Has Occurred Access To The Spec Codes And Calibration Will Also
Be Locked Out.
Should the
become locked in all 888888's as a result of
spec setting, AN
AUTHORIZED SERVICE TECHNICIAN
perform the
procedure:
AC from
2. Press and hold the [3] and
keys
plugging in AC to outlet.
The
show
the
and [9]
4. Press and hold [REZERO] key while pressing [1] [4]
press
key to advance to
spec
change specs
17 to assign a
for each scale whether it is
present
not.
o
SX-1 Platforms
Remote
Platforms
Bar Code
DIN #1
#2 |
| Set Point
NOTE: THE FOLLOWING PAGES PROVIDE A MORE DETAILED
EXPLANATION OF SPEC SETTINGS FOR SPEC 16 & 17.
54
To Next Page
Loading...
