Functions
KEY
FUNCTIONS
ON/OFF For turning the
ON and OFF.
Numeric
Decimal Point.
REZERO
Used to reset the scale to zero. Used to enter the
maintenance mode
other keys
TARE Used for
and clearing tare weight.
Kg/Lb Used to change the weighing unit between Kilogram and
Pound. (Used in Weight Mode)
CLEAR Used to
the key entries and unit weight.
Spc
NET/GROSS
Used to change between Gross and
Also used as
inventory key
UNIT WEIGHT
Used to enter the unit weight using numeric keyboard.
MODE
Used for entering
mode from weighing
SCALE Used to switch between
scales
Used for Accumulation
and for incrementing
SPEC numbers in SPEC setting
Also used to
program set
in programming mode
Used for
and for decrementing
SPEC numbers in SPEC setting mode. Also use to
program Part No in programming item.
Programming
mode
it can be used for viewing or setting date/time.
Used for storing the
data and used to print
out weight information when printer is connected.
CODE
key, for calling out ITEM memory data. Also
used to program commodity name in
PIECES
Used for
unit weight by sampling.
OPERATION
5
To Next Page
Loading...
