11
2. Main Operation
[ON/OFF] ------To turn on or off the display.
[REZERO] ------To re-zero the scale.
[TARE] -------To set tare weight.
[Í] -------To set digital tare weight value, /To shift the digital
which to be edit.
[Ï] -------To change weight unit, /To change numeric data for
set-up mode.
2.1 Zero Resetting
OPERATION Key-in WEIGHT ZERO NET STABLE
Weighing mode.
0.0 0 0
Put tare (e.g. 3 g) on platter 0.0 0 3
Zero resetting. [REZERO] 888888
0.0 0 0
Remove the weight - 0.0 03
Zero resetting.
[REZERO] 888888
0.0 0 0
Note: 1) If the weight is within the available range of zero
resetting, the display will return to 0.
If it is out of the range, the weight will remain in the display, the
buzzer will beep alarm.
To Next Page
Loading...
Need help?
General