Digi SM-300 Operation Manual

SM-300 Operation Manual (Advance)
5
Note 2: The following Preset Keys are used for entering Character Parameter or Text Data for BENCH TYPE
when SPEC 274 set to 1 "OLD".
or
 Select Parameter Data such as Barcode type and print Label Format.
 Move the cursor Change the entry to Left or Right.
 Switch INSERT or OVERWRITE alternatively.
 Change Font size.
 Backspace.
 Delete the Data.
 Select Code types (ASCII Code, Teraoka Code, etc.) for enter
Commodity Descriptions, Commercial Message, and Shop Name etc.
*Please refer to Table of Characters Code.
Note 3: The following Preset Keys are used for entering Character Parameter or Text Data for BENCH TYPE
when SPEC 274 set to 0 "NEW". (Allow enter A ~ Z by pressing preset keys and 0 ~ 9 by Numeric
Keypad.)
or
 Select Parameter Data such as Barcode type and print Label Format.
 Move the cursor Change the entry to Left or Right.
 Switch INSERT or OVERWRITE alternatively.
Note: Only allow switch in ASCII Code or TERAOKA Code entries mode.
 Change Font size.
 Switch Cap / Lower case.
 Backspace.
 Select Code types (ASCII Code, Teraoka Code, etc.) for enter
Commodity Descriptions, Commercial Message, and Shop Name etc.
*Please refer to Table of Characters Code.

Digi SM-300 Specifications

General

Brand	Digi
Model	SM-300
Category	Scales
Language	English