Digi SM-5300 Series - Page 20

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 19
Product Information
––––––––––––––––––––––––––––––––––––
1.4 Printer Setting
1.4.3 Receipt, Label and Linerless Setting
CAUTION
There is a cutter at the printer door near the dispenser. Take care not to touch or cut
your fingers against the cutter during this process.
1. Open the printer door by sliding the printer latch to left side.
SM5300P
SM5300LL
Sliding to
left side
Sliding to Left Side
2. Swing open the printer door.
3. Pull out the cassette and remove the empty roll.
SM5300P
SM5300LL