Digi SM-5300 Series - Date and Time Setup

M o d e l S M - 5 3 0 0 U s e r M a n u a l | 24
Typical Operation
––––––––––––––––––––––––––––––––––––––––
2.2 Date and Time Setup
2.2 Date and Time Setup
The built-in clock automatically works once they are set:
 Date (Month/Day/Year) ------- 2 digits for each part.
 Time -------------------------------- 4 digits (24 Hours).
OPERATION
DISPLAY
1.
MENU MODE ~> [MAINTENANCE
MENU] ~> [MAINTENANCE]
2.
Touch the [DATE AND TIME] key to
enter DATE AND TIME screen.
3.
Enter current Date by numeric keypad or
touch date on Calendar box. (e.g. 100814
= 10 August 2014) – this depend on date
format setting