Digi SM-5300 - Maintenance Procedures

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 102
3.4.3.3 Color Assignment
OPERATION
DISPLAY
1.
In Preset Key Programming, Enter group
number (e.g. 0)
Note: adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
2.
Touch [ACCUMULATION] key.
3.
Touch [FUNCTION] key select the word
COLOR display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, FUNCTION,
FLEXKEY_FUNC, KEYPAD KEY, TEXT,
IMAGE and COLOR
4.
Assign by browsing the COLOR the existing
color.
Touch [COLOR] area to browse the existing
color.
Touch the desired color (e.g. 5 – Red)
Note: Press [ESC] key to back
ACCUMULATION mode without saving
the color.