Digi SM-5300 - Page 104

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 103
OPERATION
DISPLAY
5.
Touch the desired preset key that had
assigned (e.g. VOID )
The COLOR Key will change to Red
6.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.