Digi SM-5300 - Firmware Upgrading; Software and Printer Firmware Updates

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 105
OPERATION
DISPLAY
4.
Method 2: Assign by browsing the existing
Flex_Function.
Touch [FLEX_FUNCTION] area to browse
the existing Flex_Function.
5.
Touch the desired Flex_Function key.
Or entry PLU number by keypad then touch
[ENTER] key
(e.g. Flex_Function 99 PRINT)
Touch the desired preset key.
6.
Touch [FLEXKEY_FUNC] key select the
word TEXT display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, FUNCTION, TARE,
KEYPAD KEY, TEXT, IMAGE and
COLOR
7.
Touch [TEXT] area and type desire a text to
be change text on preset key (e. g.
CHANGE).