Digi SM-5300 - Page 108

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 107
OPERATION
DISPLAY
12.
Touch [COLOR] area to browse the existing
color
Touch the desired color (e.g. 6 - GREEN)
Note : Press [ESC]key to back FLEX_FUNC
KEYS mode without saving the color
13.
Touch the desired preset key that had
assigned (e.g. CHANGE)
The COLOR Key will change to Green
14.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode