Digi SM-5300 - Major Parts Disassembly; SM-5300 B Component Disassembly

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 108
3.4.5 Maintenance Key Programming
In this mode allow default assigning of 28 preset keys for the entire Keypad Key Functions
Keys ( refer to Maintenance Key Layout ). Usually in Maintenance Keys, Keypad Key Function
Keys is being assigned. There are two methods to assign Keypad Key functions on
Maintenance preset key.
Note: This request by Australia
3.4.5.1 Keypad Key Function Assignment
OPERATION
DISPLAY
1.
In Preset Key Programming, Enter group
number (e.g. 0)
Note: Adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
2.
Touch [MAINTENANCE KEYS] key.
3.
Touch [FUNCTION] key select the word
KEYPAD KEY display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, FUNCTION, TARE,
KEYPAD KEY, TEXT, IMAGE and
COLOR