Digi SM-5300 - Page 125

Preset Key Assignment
–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 124
OPERATION
DISPLAY
48.
Touch the desired color (e.g. 22)
Touch the desired preset key that had
assigned (e.g. Preset key for Tare,
Surcharge, and PLU)
The COLOR Key will change to Purple
Note: Ensure [PRESET INFO] button is not
active.
49.
Press [X] key at keypad to exit to keys
selection mode.
Note: Touch [MENU] key to exit to the
Programming Mode.