Digi SM-5300

Print Format
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4.4 Programming of Free Format
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 142
OPERATION
DISPLAY
3.
Touch [Y AXIS] key and enter the value by
keypad. (e.g. 23)
4.
Touch [WIDTH] key and enter the value by
keypad.
(e.g. 57)
5.
Touch [HEIGHT] key and enter the value
by keypad.
(e.g. 13)
6.
Touch [STATUS] key until the word PRINT
display on the key.
Note: [STATUS] key will toggle for the
following selection, NONWEIGHT,
WEIGHT, PRINT and NO PRINT.