––––––––––––––––––––––––––––––––––––––––––––––––––––
7.1 Program Ingredient File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 182
INGREDIENT FILE
7.1 Program Ingredient File
Ingredient texts, programmed in this file can be assigned to any PLU that uses a format with an
Ingredient print area. The print area size, set on the format used, will decide the number of lines that
can be programmed. The maximum number of Ingredient lines is 15. It is possible to program up to
16 Ingredient files. Since standard format S, A, B, C and T1 ~ T12 does not have a print area set for
Ingredient, Ingredient cannot be printed when using these formats. To print Ingredient on the label,
it is required to use a Free Format with an Ingredient print area programmed.
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [INGREDIENT] key.
Note :
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Ingredient File will be
listed in INGREDIENT PROGRAMMING
Display Screen.
3. Display Screen also used to browse
existing Ingredient Files using the scroll
bar and to select file for modification
To Next Page
Loading...
Need help?
General
