–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 227
TRAY FILE
14.1 Programming TRAY FILE
Tray file is used to program Tare file, which can be selected in PLU programming. This function can
be used in condition like when more than 1 product using the same tare value.
Note: To use Tray function SPEC141D056 “Tare from Tray File” in User/Operation Spec must be
set to “Yes”
In PROGRAMMING MODE
[PLU RELATED] screen.
Touch [TRAY FILE] key to enter Tray File
Programming screen.
Note :
1. Touch [MENU] key back to
PROGRAMMING MODE
[PLU RELATED]
screen.
2. Touch [GO TO] key to search and view
the existing Tray Files
3. Touch the data file you want to modify.
4. Touch [COPY] key to select existing
Tray File copied to new Tray File.
Enter new Tray File number (e.g. 10) by
numeric key and press [PLU] key.
Note: Prompt out confirmation message
To Next Page
Loading...
Need help?
General
