Digi SM-5300 - Page 234

Place File
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
15.1 Program Place File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 233
OPERATION
DISPLAY
4.
Enter Place number. (e.g. 10)
Touch [PLU] key in the ten key.
5.
To create a new Place, touch [YES] key.
Note: Touch [NO] key to abort.
6.
Touch [PLACE] area to enter the Place
Name.
Enter Place Name by touching desired
character keys. (e.g. BARELANG)
7.
Touch [ENTER] key when finished
programming.
Note: Touch [ESC] key if you want to exit
without saving.