––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 232
PLACE FILE
15.1 Program Place File
Place File is used to program place name for PLU programming and printed on Label. Since standard
format does not have a print area set for Place name, the Place Name cannot be printed when using
these formats. To print Place Name on the label, it is required to use a Free Format with a Place
Name print area programmed. Maximum 99 Place Files can be programmed.
Touch [PROGRAMMING] key follow by
[PLU RELATED] key to enter to
Programming Mode.
Touch [PLACE] key.
Note :
1. Touch [MENU] key to return back to
Programming Mode.
2. All programmed Place File will be listed
in PLACE PROGRAMMING Display
Screen.
3. Display Screen also used to browse
existing Country Files using the scroll
bar and to select file for modification
To Next Page
Loading...
