Digi SM-5300 - Page 288

Slaughter House File
–––––––––––––––––––––––––––––––––––––––––––
22.1 Program Slaughter House File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 287
OPERATION
DISPLAY
4.
Enter Slaughter House number. (e.g. 10)
Touch [ENTER] key.
5.
To create a new Slaughter House, touch
[YES] key.
Note: Touch [NO] key to abort.
6.
Touch [NAME] area to enter the Slaughter
House Name.
Enter Slaughter House Name by touching
desired character keys. (e.g. HOUSE #10)
Touch [ENTER] key when finished
programming.
Note: Touch [ESC] key if you want to exit
without saving.
7.
Touch [COUNTRY] to select the Country
File to be link to this Slaughter House File.
(e.g. CHINA TAIPEI)
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.