Digi SM-5300 Operation Manual

Cutting Hall File
––––––––––––––––––––––––––––––––––––––––––––––––––––
23.1 Program Cutting Hall File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 293
OPERATION
DISPLAY
4.
Enter Cutting Hall number. (e.g. 9)
Touch [PLU] key.
5.
To create a new Cutting Hall, touch [YES]
key.
Note: Touch [NO] key to abort.
6.
Touch [NAME] area to enter the Cutting
Hall Name.
Enter Cutting Hall Name by touching desired
character keys. (e.g. CUTTING HALL 9)
Touch [ENTER] key when finished
programming.
Note: Touch [ESC] key if you want to exit
without saving.
7.
Touch [COUNTRY] to select the Country
File to be link to this Cutting Hall File. (e.g.
Country 5 - JAPAN)
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.

Digi SM-5300 Specifications

General

Brand	Digi
Model	SM-5300
Category	Scales
Language	English