–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 298
BREED FILE
Breed File is used to program Name of the Breed for Traceability Information programming and
printed on Label or Receipt. Since standard format does not have a print area set for Breed, the
Breed cannot be printed when using these formats. To print Breed on the label, it is required to use
a Free Format with a Breed print area programmed. Maximum 9999 Breeds can be programmed
and maximum 16 characters can be entered per File, each with 1 line.
Note: SPEC 146A008 “Traceability” (in Module Spec) must be enabled in advance.
Touch [PROGRAMMING] key follow by
[TRACEABILITY] key to enter to
Programming Mode.
Touch [BREED] key to enter Breed
Programming screen.
Note:
1. Touch [MENU] key back to
PROGRAMMING MODE
[TRACEABILITY]
screen.
2. Touch [GO TO] key to search and view
the existing Breed Files
3. Touch the data file you want to modify.
4. Touch [COPY] key to create Breed File
with data copied from existing Breed
File.
To Next Page
Loading...
