–––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 31
Note: For weight item SPEC141D031 “Discount Value” set to
“Disc Value Subtracted from Unit Price”
- A Colli is a package of several individual PLU’s with strict quantity limits per PLU, the total price of
the package is less than the addition of each individual PLU.
- The contents of package is defined –with his tolerances and order- by the shop responsible person,
during the registration the operator gets clear instruction on what item should he/she should register
with what tolerances.
- At the end of registration, the package is closed and the profit for the customer is calculated. The
customer
can gets clear overview on what he/she bought, with what condition and what profit received
The Price to pay: Unit Price of the Colli PLU
When Item Changed: The price accepted tolerance is applied on
the Unit Price of the new item within the price tolerances, the
weight tolerances still same as the old item
Example: Total Price = $30.00, Colli Unit Price = $20.00
The price to pay: Total Price x Colli percentage,
then Total Price - Profit
When Item Changed: The Weight tolerances is applied, here the
item can be replaced by any item as long as within the weight item
Example: Total Price = $300.00, Colli Percentage
- Stand for Frequent Shopper Discount, it only available for “Unit Price Discount” and “Total Price %
Discount”
- FSD Discount can be differenced by:
1. For Non-FSD, it print non-fsd image (image 5 – 7) and Text 9 - 12
2. For FSD, it print fsd image (image 8 - 10) and Text 13 – 16
3. All other text and image is printed for both
Note: To enable FSD Discount, SPEC 141D005 “FSD Price & Image”, (in User/Operation Spec)
set to “Allow”
FSD Saving = (STD Unit Price – FSD Unit Price) X Net Weight
FSD Saving = (STD Total Price) – (FSD Unit Price X Net Weight)
To Next Page
Loading...
