Digi SM-5300 - Page 33

PLU Programming
–––––––––––––––––––––––––––––––––––––––––––
2.3 Program PLU File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 32
37) Type of Markdown Entry
If Markdown is selected, the Original Unit Price/Price & Discount Unit Price/Price will print
on label, and the Original Unit Price/Price will be crossed with 2 lines.
a. Touch [TYPE OF MARKDOWN] key.
b. Touch the desired Type of Markdown function.
Note: All Type of Markdown will be listed.
38) 1
st
Limit for Discount Entry
a. Touch [1
ST
LIMIT DISCOUNT] key.
b. Enter the weight value for the 1
st
Limit Discount by keypad.
39) Discount within 1
st
Limit Entry
a. Touch [DISC W/IN 1
ST
LIMIT] key.
b. Enter the Discount within 1
st
Limit by keypad.
40) 2
nd
Limit for Discount Entry
a. Touch [2
ND
LIMIT DISCOUNT] key.
b. Enter the weight value for the 2
nd
Limit Discount by keypad.
41) Discount within 2
nd
Limit Entry
a. Touch [DISC W/IN 2
ND
LIMIT] key.
b. Enter the Discount within 2
nd
Limit by keypad.
42) Start Date Entry
a. Touch [START DATE] key.
b. Enter the Start date by keypad.
c. Date Format can be selected in the SPEC141D02 in USER/Operation Spec
43) End Date Entry
a. Touch [END DATE] key.
b. Enter the End date by keypad.
44) Effective Time Entry
a. Touch [START TIME] key.
b. Enter the Start time by keypad in 24hour format.
45) TO (End Time) Entry
a. Touch [TO] key.
b. Enter the End time by keypad in 24hour format.