Country File For Cool
Programming
–––––––––––––––––––––––––––––––––––––––––––
30.1 Program Country File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 322
COUNTRY FILE for COOL PROGRAMMING
30.1 Program Country File
Country File is used to program Country Name for Cool Information programming and printed on
Label. Since standard format does not have a print area set for Country Name, the Country Name
cannot be printed when using these formats. To print Country Name on the label, it is required to use
a Free Format with a Country Name print area programmed.
Maximum 9999 Country Files can be programmed and maximum 16 characters can be entered per
Country File, each with 1 line.
Note: 1. SPEC 146A008 “Traceability” (in Module Spec) set to “YES”.
2. SPEC 141D053 “Traceability Type” (in Module Spec) set to “Cool Feature”
Touch [PROGRAMMING] key follow by
[COOL] key to enter to Programming Mode.
To Next Page
Loading...
Need help?
General
