EasyManua.ls Logo

Digi SM-5300 - Page 345

Digi SM-5300
495 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Production Step File
––––––––––––––––––––––––––––––––––––
34.1 Program User Production Step
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 344
USER PRODUCTION STEP
34.1 Program User Production Step
User Production Step is used to program Name of the User Production Step File for COOL
Information programming and printed on Label or Receipt. Since standard format does not have a
print area set for Category, the Category cannot be printed when using these formats. To print
Category on the label, it is required to use a Free Format with a Category print area programmed.
Note: COOL CLASS in this file must follow what CLASS number when programmed COUNTRY File
e.g.: COUNTRY SINGAPORE in country file set cool class to 5, when select this country the cool class
Default Production Step should
Note: 1. SPEC 146A008 Traceability” (in Module Spec) set to “YES”.
2. SPEC 141D053 “Traceability Type” (in Module Spec) set to “Cool Feature”
OPERATION
DISPLAY
1.
In PROGRAMMING MODE
touch
[COOL]
to entry COOL Programming Mode
2.
Touch [USER PRODUCTION STEP] to
entry User Production Step screen
3.
Enter User Production Step number (e.g. 4)
Press [PLU] key.

Other manuals for Digi SM-5300

Related product manuals