User Production Step File
––––––––––––––––––––––––––––––––––––
34.1 Program User Production Step
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 345
To create a new User Production Step, touch
[YES] key.
Note: Touch [NO] key to abort.
Touch [TEXT] area to enter the User
Production Step text name.
Enter Cool Text Name by touching desired
character keys. (e.g. USER PRODUCTION4)
Touch [ENTER] key when finished
programming.
Note: Touch [ESC] key if you want to exit
without saving.
Touch [COUNTRY] key, to show country
file list. From the list select a country file.
(e.g. SINGAPORE)
Entry the class number to [COOL CLASS]
key used keypad (e.g. CLASS 5)
Note : COOL CLASS must follow what CLASS
number when programmed COUNTRY
File
e.g. : COUNTRY SINGAPORE set cool
class to 5, when select this country the
cool class on user production should 5
To Next Page
Loading...
Need help?
General
