Digi SM-5300 Operation Manual

Default Production Step File
–––––––––––––––––––––––––––––––
35.2 Copy a Default Production Step
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 353
35.2 Copy a Default Production Step
The programmed Default Production Step data can be easily copied into a new Default Production Step.
This function is very useful to save time or avoid mistake for the similar Default Production Step data
programming
OPERATION
DISPLAY
1.
In Default Production Programming Mode,
enter a new User Production Step number.
(e.g. 9004)
Touch [COPY] key.
Note: Touch [ARROW DOWN] or [ARROW
UP] for more selection.
2.
Touch the desired Default Production data to
copy from.
(e.g. DEFAULT PRODUCTION STEP 9003)
Note: Change the necessary data if required.
3.
Touch [SAVE] key to save the programmed
data.
Note: Touch [MENU] key to escape saving
data.

Digi SM-5300 Specifications

General

Brand	Digi
Model	SM-5300
Category	Scales
Language	English