–––––––––––––––––––––––––––––––––––––––––––––
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 380
41.2 Profile
Profile is used to program clerk entry permission (is a type of security) to scale function. Enable to
control over clerk usage in scale. Clerk need provide password to enter to a function or mode, when
the login screen appear.
Note: To assign profile and create password for clerk, check Clerk File programming.
Note: Spec 146A004 “Password System” to “Yes” (to program) and Spec 141D028 “Password
Protection” to “Enable” to run security/this function set
In PROGRAMMING MODE [SETUP]
screen.
Touch [PROFILE] key to enter profile
programming screen.
Enter Profile Number (e.g. 5) by pressing
the numeric key and then follow by press
[PLU] key.
Note: Touch [NO] key to abort. To create a
new Production Step, touch [YES] key.
To Next Page
Loading...
Need help?
General
