––––––––––––––––––––––––––––––––––––––––
42.1 Configuration of Mini Base (HTBS-03)
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 382
E-Label/E-Tag Setting
42.1 Configuration of Mini Base (HTBS-03)
This function is used to enable received data (PLU) on E-Tag device and displaying the information
of PLU in to E-Tag’s Screen
The Format Display will show follow with our programmed in Print Format Programming in advance.
SPEC 146A014 e.LABEL set to “SERVER” to enable ELABEL key.
SPEC146A084 “HTBS-03” set to “YES”
SPEC 141C043 “HTBS-03 CONNECTION” set to “USB 1”
SPEC 141D200 “e.Label DATA” set to “Mapping Number” and reboot scale after set SPECs.
Note: 1. Each E-Tag device, contain 1 PLU data
To Communicate Scale and E-Tag need a device is have same function with RF that we called Mini
Base Station or HTBS-03 (
This device available for E-Tag only
).
In E-Label PROGRAMMING MODE
screen.
Touch [MINIBASE CONFIG] key to enter
MINIBASE CONFIGURATION programming
screen.
Enter Mini Base Configuration CD number
(e. g. 60)
Press [PLU] key at keypad.
To Next Page
Loading...
