–––––––––––––––––––––––––––––––––––––
3.4 Programming of Preset Keys
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 52
3.4 Programming of Preset Keys
3.4.1 Primary Key Programming
There are 14 pages of preset keys in Primary Keys Programming Mode. In this mode allow
assigning maximum of 400 preset keys and it is divided into two sections, whereby the first
section can assign 210 keys for all the PLU and other Functions Keys and the second section
can assign 210 keys only for Clerk and Function Keys, (Primary Key Layout). Usually in the first
section, only PLU is being assigned and other Function Keys are being assigned either in the
second section or in Secondary Keys.
3.4.1.1 Group Name Program for Preset Key
It is advisable to program the Group Name first before doing the Preset Key Assign. Up to 10
Group can be program and this Group Function helps to group the preset key. Example:
Group 1 is to assign PLU and Group 2 is to assign all the Functions. Maximum 16 characters
can be entered for the Group Name with 1 line.
Menu Mode ~> Programming ~> Preset key
In Preset Key Programming, Enter group
number (e.g. 0)
Note: adjust Primary keys, Secondary keys and
Accumulation keys to desired display size
Touch [PRIMARY KEYS] key.
Touch [PLU] key select the word GROUP
display on the key.
Note: [DATA TYPE] key will toggle for the
following selection, PLU, FUNCTION,
DEPT, GROUP, CLERK, MG,
TRACEABILITY, TARE, TAX,
FLEXKEY_FUNC, SURCHARGE, LABEL
FORMAT, KEYPAD KEY, TEXT, IMAGE
and COLOR
To Next Page
Loading...
Need help?
General
